Why is it important to clean your bike’s drivetrain?
- A clean bike is a fast bike, and by keeping it clean, you’ll extend the life of the most wearable parts, like your chain and cassette. Follow these tips for a quick and no-so-dirty drivetrain cleaning routine.
- 1 What can I clean my drivetrain with?
- 2 How often should you clean your bike drivetrain?
- 3 Can you use dish soap to degrease bike chain?
- 4 What can I use instead of bike degreaser?
- 5 Is WD-40 a degreaser?
- 6 Is WD40 good for bike chains?
- 7 Is WD-40 good for bike chains?
- 8 When should I clean my drivetrain?
- 9 How long does a drivetrain last?
- 10 Can you hose down a bike?
What can I clean my drivetrain with?
What do you need to clean your drivetrain?
- Bike cleaner.
- Cycle specific degreaser.
- Chain lubricant.
- Cleaning brushes – you can buy bike-specific ones but any non-abrasive cleaning brushes would work.
- Old rags, cloths or a sponge.
- A bucket of water or a hosepipe.
How often should you clean your bike drivetrain?
Ideally, you should do a quick clean and re-lube after every hard ride or two. A more in-depth wash is necessary if you ride through rain or mud. Keeping your MTB clean (particularly drivetrain) is the most important preventative maintenance you can perform for your mountain bike.
Can you use dish soap to degrease bike chain?
You can use hot water with dish soap, a solvent or a degreaser. Step 2 Place the removed bicycle chain into the pan or plastic tub. Soak the chain for one to two minutes. Step 5 Remove the chain and wipe the cleaning solution away with a clean cloth.
What can I use instead of bike degreaser?
While you can use automotive or bicycle specific degreaser, kerosene is a good low cost (but smelly) alternative. It is commonly available at supermarkets and hardware stores and does a great job of dissolving chain grime.
Is WD-40 a degreaser?
WD-40 Specialist® Degreaser Contains a proprietary industrial-strength solvent that quickly breaks down grease, yet unlike other harsh degreaser solvents is safe on most surfaces including metals, plastics, rubber, glass, aluminum and more (if unsure test on a small area first).
Is WD40 good for bike chains?
“As a matter of fact, WD40 will actually strip away any existing lubricant and leave your drivetrain dry – metal on metal. You can use WD40 to clean your bike chain with no problems – but you should wash all the product away before applying a regular chain oil.
Is WD-40 good for bike chains?
WD-40 is a great bike chain lube water based lubricant and will not only lubricate the chain well, but will also keep it rust and corrosion free. It also minimizes the accumulation of dirt which reduces the wear and tear of the chain.
When should I clean my drivetrain?
When to Clean Up It’s time to clean your bike drivetrain when shifting is not as smooth and precise as when you rolled your bike out of the bike shop. If you ride in wet conditions often, you should wipe down your drivetrain after every ride and apply lube when your chain gets squeaky.
How long does a drivetrain last?
Expect between 1,500 and 3,000 miles from a 10-speed chain. It helps to establish what counts as ‘worn out’. A chain is worn enough to affect transmission efficiency when it lengthens by 0.75% but has some life left if extended mileage is the aim, in which case it should ideally be replaced when it lengthens by 1%.
Can you hose down a bike?
So, can you use a hose on your bike? YES! It is true that if you leave water sitting on your bike for a long time, leave soap or degreaser on your bike, or do not properly dry off your bike before storing it, you could have some rust and wear issues on your hands.