How To Measure Bike Chain Size? (Solution)

What size bike chain do I Need?

  • The standard bike chain is either 3/32 (mtb) or 1/8 (cruiser) wide.. the chain that came with your kit is 3/16 wide. You just need to find one that width I think. they are all three 1/2 between links I believe.

How do I know my bike chain size?

For measuring the length of bicycle chain size, you need to do the following:

  1. Count the number of teeth on the biggest front sprocket and largest rear sprocket.
  2. Next, you need to measure the distance between the crank bolt’s rear axle and midpoint.

How do I know chain size?

How to Tell What Size Chain You Have

  1. The distance from the center of one pin to the center of the next pin, also known as the “pitch” of the roller chain.
  2. The diameter and width of the roller.
  3. Plate thickness, determined by measuring the plates from one flat side to another.

Are bike chains universal?

All modern bicycle chains are made to the “one-half inch pitch” standard, meaning from rivet to rivet is nominally 0.5 inches. The sprocket teeth are cut for this same one-half inch standard to accept bicycle chains. However, this does not mean all makes and models of chains are interchangeable.

You might be interested:  How To Fix A Stuck Handle On Dirt Bike?

What is the standard bike chain size?

Chains come in 3⁄32 in (2.4 mm), 1⁄8 in (3.2 mm), 5⁄32 in (4.0 mm), or 3⁄16 in (4.8 mm) roller widths, the internal width between the inner plates. 1⁄8 in (3.2 mm) chains are typically used on bikes with a single rear sprocket: those with coaster brakes, hub gears, fixed gears such as track bicycles, or BMX bikes.

What’s the difference between 40 and 41 chain?

# 40 will be the beefiest chain in this class. This will help with thicker sprockets since there is more room between the side plates. #41 will look just like the #420 chain, but will stand shorter.

How much does it cost to replace a chain on a bike?

How much does a bike chain cost to replace? Entry level chains can start off around $15.00 with more expensive and higher performance chains ranging from $25.00 to $60.00 or more. More expensive chains increase shift quality and are generally more durable as they wear.

What do the numbers on a bike chain mean?

Chain size is in inches, the three digit number used to describe the chain size is based on the “rule of eights”. The first digit is for chain pitch. This is the distance between the pins. The second and third digits combine for roller width, with a decimal point inserted between the second and third digits.

Leave a Reply

Your email address will not be published. Required fields are marked *